• ECS filter - post-filtration for CNC spindle cooling

    ECS filter – post-filtration for CNC spindle cooling

    ECS filter – post-filtration for CNC spindle cooling

Filter ELS / ESO

ESO cartridge filter

Cartridge filters are used for post-filtration of already prepared process water. They filter the smallest suspended and microparticles down to a size of 1 µm and thereby guarantee the high requirements of spindle cooling water of CNC machining centres.

ESO cartridge filters consists of a polypropylene housing with 1¼” supply and discharge connection, are designed for an operating pressure of up to 4 bar and have a delivery rate of up to 2000 l/h. 76.2 cm filter cartridges with different filter units can be used for particle separation from 1 to 100 µm.

We would be happy to advise you in the tailored design of cartridge filters according to your individual requirements.

Technology:
  • Polypropylene plastic housing
  • Operating pressure of up to 4 bar
  • Delivery rate of up to 2000 l/h
  • For 76.2 cm filter units
  • Particle separation from 1 to 100 µm
ELS lamellar filter

Lamellar filters are used predominantly as primary filters for pre-filtration of ESO cartridge filters. They can also be used as the main filter for low process water quantities without a high particle concentration.

Lamellar filters consist of a polyamide housing and are designed for an operating pressure of up to 10 bar. The delivery rate is up to 25 m³/h per filter module and dependent on the filter unit that is used. The filter unit has a screw mechanism with which the pre-tension of the coated lamellar discs can be loosened and the filter can be flushed conveniently. As a result, lamellar filter units can be re-used after being rinsed out.

We would be happy to advise you in the tailored design of lamellar filters according to your individual requirements.

Technology:
  • Polyamide plastic housing
  • Operating pressure of up to 10 bar
  • Delivery rate of up to 50 m3/h
  • Washable filter unit
  • Two pressure measuring points with manometer
  • Two ball valves
  • Particle separation from 20 to 200 µm

Gallery


Output and dimensions

Type Delivery rate Filter unit
ELS 50 Single max. 25 m3/h * 20 μm / 55 μm / 70 μm / 100 μm / 130 μm / 200 μm
ELS 80 Dual max. 50 m3/h * 20 μm / 55 μm / 70 μm / 100 μm / 130 μm / 200 μm
ESO 30 max. 2000 l/h * 1 µm / 5 µm / 10 µm / 15 µm / 30 µm / 100 µm
* The maximum delivery rate depends on the filter units that are used and their degree of contamination

ECS Eich GmbH
Zur Dornheck 10
D-35764 Sinn / Germany

Tel.: +49 2772 - 5725-0
Fax: +49 2772 - 5725-25
E-Mail: info@ecs-eich.com